PM Series


Micon dosing systems are high quality products for dosing of various chemicals.

The PM solenoid metering pumps family offer very reliable and precise dosing inside IP65 casing, via digital control and wide backlit displays. Can work as constant flow rate or proportional to an external mA signal or with built-in controllers for Ph, conductivity,Redox and Chlorine readings. Easy to install and to program.

  • Dosing pumps for wall mounting (optional on base)
  • IP65 plastic container made of polypropylene reinforced with glass fibers
  • Polypropylene pump head with FPM or EPDM seals. (on request: PVC, SS316, PTFE, PVDF)
  • Manual drain valve
  • Input Level control
  • power supply: Standard 230 Vac 50/60 Hz    On request 110 Vac, 24 Vac, 24 Vdc, 12 Vdc
  • Flow rate (l / h-bar): 1-15 / 2-10 / 5-7 / 10-10 / 20-3 / 50-0,1



Metering dosing pumps – Constant flow rate regulation. PVDF pump head with FPM or EPDM seals

  • Led power-on
  • Led Alarm
  • Led pulse solenoid
  • LCD display
  • Flow rate digital adjustment by keys
  • Start/Stop key
  • Plastic box IP65 protection degree
PME Datasheet



  • LCD display
  • Led power-on
  • Led Alarm
  • Led solenoid pulse
  • Flow rate digital adjustment (percentage by UP/DOWN keys)
  • Start/Stop key (Start/pause dosing)
PMK Datasheet



  • Backlighted graphic display
  • Very easy to use: programming way like “mobile phone”
  • Proportional to a digital signal (water-meter pulse-sender):
  • ppm mode – selecting the “ppm” quantity the pump automatically adjust the frequency dosing;
  • n:m mode – setting the number of external pulse and the correspondent pump strokes.
  • Proportional to an external signal 4-20 or 20-4 mA, selecting the mA range and the correspondent value of frequency dosing
  • Constant flow rate mode
  • Automatic regulation of frequency dosing (the pump automatically follows the flow variation)
  • Automatic managing of excessive external pulses (If the pump receive pulses during the dosing the microprocessor automatically adjust the working frequency without lost any signal)
  • Level probe input
PM Plus Datasheet



  • Backlighted graphic display
  • Very easy to use: programming way like a mobile phone
  • Proportional dosing to the set-point value
  • Constant flow rate mode
  • Level probe input
  • Version pH/Redox(mV) selectable from the user
  • Start/Stop key
  • Measure ranges:

pH: 0-14,00 pH; BNC input from pH probe
Redox(mV): 0-1999 mV; BNC input from Redox(mV) probe
Free Chlorine: 0-10,00 ppm; Input probe SCLO series
Conductivity: 0-10.00 mS via probe SCD K1; other ranges available 1000mS, 100 mS, 10 mS,(SCD K5)

PMi Datasheet